View AZ733W-2A-3DE_4457934.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AZ733W AZ
DPST MINIATURE POWER RELAY
FEATURES * * * * * * * * Dielectric strength 5000 Vrms 1.5 mm contact gap Epoxy sealed version available 10 Amp switching -- double pole contacts Isolation spacing greater than 8 mm UL Class B insulation system UL, CUR file E44211 TUV file R50129285
CONTACTS
Arrangement Ratings DPST (2 Form A) Resistive load: Max. switched power: 300 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 150 VDC* or 400 VAC
*Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory.
GENERAL DATA
Life Expectancy Mechanical Electrical Minimum operations 5 x 105 1 x 105 at 10 A 240 VAC Res.
Operate Time (Typical) 10 ms at nominal coil voltage Release Time (Typical) 4 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 5000 Vrms contact to coil (at sea level for 1 min.) 3000 Vrms between open contacts 3000 Vrms between contact sets Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock 1000 megohms min. at 20C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage at nominal coil voltage -40C (-40F) to 80C (176F) -40C (-40F) to 130C (266F) 0.062" DA at 10-55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270C (518F) 5 seconds 80C (176F) 30 seconds 18 grams
Rated Load UL, CUR TUV
10 A at 250 VAC General use, 100k cycles [1][2][3] TV-3 at 125 VAC [1] 10 A at 30 VDC, 250 VAC resistive, 100k cycles [1] [2][3] [1] Silver cadmium oxide [2] Silver tin oxide [3]Silver nickel Silver cadmium oxide, silver tin oxide or silver nickel, Gold plating available < 50 milliohms initially (24 V, 1 A voltage drop method)
Material Resistance
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 450 mW
Enclosure Terminals Max. Solder Temp. Max. Solder Time 2.0 W at 20C (68F) ambient 40C (83F) at nominal coil voltage Max. 130C (266F) Max. Solvent Temp. Max. Immersion Time Weight
NOTES
1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice.
4/9/09W
AZ733W AZ
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil VDC 3 5 6 9 12 18 24 30 48 60 Must Operate VDC 2.25 3.8 4.5 6.8 9.0 13.5 18.0 22.5 36.0 45.0 Max. Continuous VDC 4.7 7.9 9.5 14.2 18.9 28.4 37.9 47.3 75.9 94.8 Coil Resistance 11.3 10% 31 45 101 180 405 720 1125 2,880 4,500 10% 10% 10% 10% 10% 15% 15% 15% 15%
ORDER NUMBER*
Unsealed AZ733W-2A-3D AZ733W-2A-5D AZ733W-2A-6D AZ733W-2A-9D AZ733W-2A-12D AZ733W-2A-18D AZ733W-2A-24D AZ733W-2A-30D AZ733W-2A-48D AZ733W-2A-60D Sealed AZ733W-2A-3DE AZ733W-2A-5DE AZ733W-2A-6DE AZ733W-2A-9DE AZ733W-2A-12DE AZ733W-2A-18DE AZ733W-2A-24DE AZ733W-2A-30DE AZ733W-2A-48DE AZ733W-2A-60DE
*Add suffix "E" to "2A" for silver tin oxide contacts. Add suffix "B" to "2A" for silver nickel contacts. Add suffix "A" for gold plated contacts.
HARDWARE ORDERING DATA
DESCRIPTION
Socket
ORDER NUMBER
ST484-U1
DESCRIPTION
Retainer
ORDER NUMBER
ST482-2
MECHANICAL DATA
PC BOARD LAYOUT
(Bottom View)
1.14 (29) .51 (13) .787 (20.0) .197 (5)
.160 .015 (4.2 .4)
.295 (7.5)
1.02 (25.9)
0.015 (0.38)
.08 (2.1) .05 DIA. (1.3)
(6 places)
Terminal No. 1,4,5,8 3,6
Dimensions Tol.: 0.005 (0.13) 0.018 (0.457) x 0.038 (0.965) 0.011 (0.279) x 0.038 (0.965)
ST484-U1
.500 (12.7)
HARDWARE
.177 (4.5) MAX 1.28 (32.5) .366 (9.3) .354 (9.0)
1.22 (30.9)
.414 (10.5)
.125 DIA (0.5)
WIRING DIAGRAM
(Bottom View)
.295 (7.5) .197 (5.0)
RETAINING CLIP
1.217 (30.9) .158 (4.0)
1 8
3 6
4 5
.590 (15) .197 (5.0) .059 DIA (1.5)
.138 (3.5) 1.004 (26.5)
.118 (3.0)
Viewed toward terminals
ST482-2
Dimensions in inches with metric equivalents in parentheses. Tolerance: .010"
4/9/09W

▲Up To Search▲

Price & Availability of AZ733W-2A-3DE

	To Download AZ733W-2A-3DE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .